Our Various Arm Options

To see the various the different arm treatments that we sell most often on our exposed-wood-arm models, go to the page for our Florida wood sofa model .

Our Custom 05 model (higher-priced fully-upholstered model) has a relatively high arm that is well-padded on the inside, for leaning one's back against it..

Our Virginia model has a low, thickly-padded arm that is most suited for a headrest, not at all suited for a backrest, and lower than the ideal height for an arm rest for most people.

This photo shows the Virginia arm combined with toss pillows, but we normally sell this model without toss pillows (of course, customers often add their own pillows).

Shown here is the "high arm cushion" option, cushions that can go against one or both arms of the Custom 05 model (shown), the Florida model, the California model, the Maryland model, or the New Jersey model. The top of this cushion is approximately even with the tops of the regular, standard-height (31" floor-to-top) backs. You could put one of our armless or one-arm sofas, loveseats or chairs up against that end and the two would make a relatively continuous L-shaped arrangement, although the appearance would not be first class, as follows:
1) the level front of the primary seat would be next to a backward-sloping neighboring seat,
2) the front corners of the seat cushions could come into reasonable alignment at the inside corner only if the end cushion is 30" wide,
3) there would be small gaps where the separate pieces come together, and
4) on three of our models there is normally a widened section at the end few inches of the front rails; that widened section on the armless or one-armed piece would come up next to a narrower section on the front rail of the neighboring piece, causing a somewhat discontinuous look, in addition to the small gap that would exist where the two pieces come together. That width discontinuity could be dealt with by specifying a straight-across full-height front rail for $20 extra per complete order (that can be ordered on any model, it's already that way automatically on the California and Maryland models)..

Price: $110 per high arm cushion (we do this option fairly seldom, and there is special work involved).

To go (or return) to the Comfy 1 home page and much more information on our various designs, quality features, sofas, sectional sofas, and prices (on individual product pages), click here.